[ap-utils] MRTG

[Ivar]

check for spaces at the beginning of the lines. Also, while coping from man
output, various ' ´ characters may not appear correctly. At least I dont see
any ' in your example.

Target[ap_e]: `/usr/bin/ap-mrtg -i 192.168.90.214 -c "******" -t ethernet `

 regards,
  Ivar
----- Original Message ----- 
From: "David Shaw" <maillist@computer-medic.us>
To: <ap-utils@kiev.iorta.com>
Sent: Tuesday, June 24, 2003 4:48 PM
Subject: Re: [ap-utils] MRTG


> **I read the man page for ap-mrtg and I get a error message emailed to
> me.
>
> Bareword found where operator expected at (eval 4) line 1, near
> "/bin/ap"
>         (Missing operator before ap?)
> ERROR: Target[ap_e] eval warning: syntax error at (eval 4) line 1, near
> "/usr/local"
>
> **Here is waht I have in my mrtg.cfg file. Can anyone tell me what I'm
> doing that not right?
>
> #Simple mrtg.cfg for get stats from Atmel based AP:
> Target[ap_e]: /usr/local/bin/ap-mrtg -i 66.80.227.251  -c "passwd" -t
> ethernet -v
> Options[ap_e]: noinfo, growright, bits
> MaxBytes[ap_e]: 12500
> Title[ap_e]: Traffic Analysis for AP Ethernet port
> PageTop[ap_e]: <H1>Traffic Analysis for AP Ethernet port</H1>
> Target[ap_w]: /usr/local/bin/ap-mrtg -i 66.80.227.251 -c shaw -t
> wireless -v
> Options[ap_w]: noinfo, growright, perminute
> ShortLegend[ap_w]: pkt/min
> MaxBytes[ap_w]: 100000000
> Legend1[ap_w]:  Packets In
> Legend2[ap_w]:  Packets Out
> YLegend[ap_w]: packets/min
> Title[ap_w]: Traffic Analysis for AP Wireless port
> PageTop[ap_w]: <H1>Traffic Analysis for AP Wireless port</H1>
> Target[ap_s]: /usr/local/bin/ap-mrtg -i 66.80.227.251 -c "passwd" -t
> stations -v
> Options[ap_s]: growright, gauge, noinfo
> ShortLegend[ap_s]: stations
> MaxBytes[ap_s]: 10
> YTics[ap_s]: 10
> Legend2[ap_s]: none
> Legend1[ap_s]: Associated Stations
> YLegend[ap_s]: Associated Stations
> Title[ap_s]: Traffic Analysis for AP Associated Stations
> PageTop[ap_s]: <H1>Traffic Analysis for AP Associated Stations</H1>
> LegendO[ap_s]: none
> LegendI[ap_s]: Associated Stations
>
> Thanks, David
>
>
> On Mon, 2003-06-23 at 11:53, Roman Festchook wrote:
> > On Пон 23 Чер 2003 20:56, David Shaw wrote:
> > > Hello All, Does anyone know how to setup ap-mrtg to show up on my mrtg
> > > web page? I can manully run the cmd and it looks like it's working.
Just
> > > need some setting it up so I can view it from the web page.
> > man ap-mrtg
>
> _______________________________________________
> ap-utils mailing list
> ap-utils@lists.polesye.net
> http://lists.polesye.net/mailman/listinfo/ap-utils
>